Setting up alerts
Alerts are triggered by the system when an unusual activity is observed with the network devices on the site.
To view the
page, click > .There are four types of alerts:
Connection problem () — Alerts that are sent when problems accessing the Internet are detected.
Device problem () — Alerts that are sent when a problem with the device is detected.
Overload () — Alerts that are sent when the number of clients reaches the set limit.
New software available () — Alerts that are sent when a new version of the software is available to be installed.
To enable or disable alerts for registered mobile devices, follow these steps :
1. | Click the |
2. | Click the | icon located at the extreme right of the Alert title bar. The four available alert types are displayed and enabled by default.
3. | Move the slider to the left if you wish to disable an alert or move the slider to the right against the alert you wish to enable. |
The
To view the Alert history, follow these steps:
1. | Click the HPE OfficeConnect Wi-Fi Portal home page. | module on the
2. | On the System Health main page, you will see the details of the latest alert. Click the | . The page is displayed which lists all the alerts received by the app, including the active alerts and the ones that have been cleared.
3. | Click the alert you want to acknowledge. The | page is displayed.
When there are multiple active alerts received by the application, the summary box in the
page displays the active alerts with the highest severity in the system along with their color codes. For example: Major active alert takes the highest priority and is displayed in a red summary box.To acknowledge the alerts, follow these steps:
1. | Click the summary box. |
2. | The | page displays a list of active alerts in descending order of the alert severity and the order by which they should be acknowledged.
3. | Click the alert to view the | page. Follow the recommended actions to clear the alert.
Was this information helpful?
Great! Thanks for the feedback.